Enable a Bluetooth LE IoT network with cloud control using Hologram Nova, Raspberry Pi Zero W and Droplit.io services and software.
This project takes you through the easiest way to connect a device over cellular with the Hologram Dash hardware.
Put your drone on a longer leash executing programmed flight on a powered Pi Zero. YOLO object recognition, connect over Hologram CLI.
Autonomous Surveillance Car (QUICKBOT), for providing security system at a micro level.
Use the MKR NB 1500 and Hologram's cellular network to leverage new 5G bands to build IoT applications using the Chirpers flow designer.
This project utilizes the latest AI technique to detect/monitor wild animals and send the information out through Hologram Cellular
Temperature & humidity monitoring is a very important factor in our daily life especially if we want to monitor remote places.
CovidTestDrone enables self-administered COVID-19 tests to be delivered within minutes to patient’s homes via drone delivery.
A prototype for Smart Cities to enhance Environment Monitoring using MKR GSM1400 and Hologram.
This example walks through connecting a Seeed Studio GPRS Shield to the Hologram cellular network using raw AT commands.
An industrial IoT prototype using Arduino, WIZ750SR, Raspberry Pi, and Hologram Nova to monitor environment.
Pi Zero WAN provides low bandwidth communications in remote places.
Connect to the Losant IoT platform via MQTT on an Arduino connected over the Hologram cellular network!
Hologram Nova and Raspberry PI simple SMS based relay control
Visually program IoT apps in the browser using an Arduino connected over cellular!
SBC w/ bluetooth, a cell modem, and a gps, build a cheap portable scanner for the automatic detection and reporting credit card skimmers.
Dog harness + computer vision + cellular network. Tracks dog biometrics and object recognition sending SMS notifications.
Am I going to run out of beer? Nope! Send SMS to remind yourself not to run out of ale!
Solar battery powered device relays data from a remote, wide area of LoRa radio devices to The Things Network via cell network.
Quick start with RAK8212 iTracker NB-IoT/Cat M/GPRS module which come from RAKWireless, and connect to Hologram online service.
This is a project based on Arduino MKR GSM 1400 that will send a text notification when it senses rain drops.
A GPS and temperature sensor built on the Hologram Dash for asset tracking or outdoor monitoring.
Using the Nova Hologram, IoT Relay and a Raspberry Pi, easily make a remote smart switch so you can turn devices on/off remotely.
Create a device that will send you a text when your car's alarm goes off.