GERIATRINO is a device designed to be an economic and efficient monitoring and alert system for vulnerable people living alone.
Build a car hacking spy device to remotely read and send CAN commands and track GPS location. All based on open source software/hardware.
Quick start with RAK8212 iTracker NB-IoT/Cat M/GPRS module which come from RAKWireless, and connect to Hologram online service.
Portable cell connected sensors for light and air transmits GPS location and readings to be stored and clickable maps created.
Envirix is a monitoring system that is equipped with 10 different sensors. It is currently under develoment by me. Check it out!
48% percent of Detroit households are food insecure; OASIS autonomous food deliveries unite Detroit's urban farms with less-served families!
A prototype for Smart Cities to enhance Environment Monitoring using MKR GSM1400 and Hologram.
An industrial IoT prototype using Arduino, WIZ750SR, Raspberry Pi, and Hologram Nova to monitor environment.
Connect to the Losant IoT platform via MQTT on an Arduino connected over the Hologram cellular network!
Easily measure air quality, avoid polluted areas, and improve your health and that of your community.
This tutorial will take you step by step on how to use the Hologram GSM services with the RAK WisLTE module and Arduino IDE.
This tutorial will take you step by step on how to use the Hologram GSM services with the RAK WisLTE module.
This powerful cellular shield can easily turn your project into a full-fledged phone with voice, SMS, LTE data, GPS, and more!
This tutorial takes you step by step through the process of registering your Hologram sim and use it with the RAK iTracker module.
Send MQTT updates to Adafruit.io using a FONA module and Hologram.io's SIM Card.
Use Hologram's cellular network to monitor a fleet of vehicles using OBDII, Raspberry Pi, GPS, and GSM.
Keep your plants alive all year round with this plant vital sign monitor.
Remote programmable AC outlet (connected to engine heater) controller using SMS, with temp sensor.
AT Workshop - Walk through communicating with cellular modems through UART with CircuitPython.
Using a Raspberry Pi Zero W, a Hologram Nova USB cellular modem, GPS + ODB-II to allow remote viewing of vehicle + engine information
Internet connected car stereo with obd 2 and remote start.
This project utilizes the latest AI technique to detect/monitor wild animals and send the information out through Hologram Cellular
Real-time following of competing airplanes.
An IoT remote stove monitoring and control system designed to provide peace of mind to those out of the house.