Self-driving rover using computer vision and deep learning to identify and clean up small pieces of trash.
Connect to the Losant IoT platform via MQTT on an Arduino connected over the Hologram cellular network!
An industrial IoT prototype using Arduino, WIZ750SR, Raspberry Pi, and Hologram Nova to monitor environment.
Learn how to make a powerful Arduino GPS tracker that posts data to the cloud via LTE CAT-M and view data graphically on IoT dashboards!
Send and receive real SMS text messages with your Arduino! A self-contained texting device with its own SIM card and phone number.
Connect your Raspberry Pi to the world through cellular with the Hologram Nova.
New to Nova? New to Raspberry Pi? New to Python? This tutorial goes along with our kit, walking you through each step.
Easily measure air quality, avoid polluted areas, and improve your health and that of your community.
A rapidly deployable distributed Wi-Fi IEEE 802.11s mesh communication network with cellular modem Internet access for emergency disasters.
This powerful cellular shield can easily turn your project into a full-fledged phone with voice, SMS, LTE data, GPS, and more!
Internet connected car stereo with obd 2 and remote start.
Self contained cellular GPS tracker. Ever wanted to spy on bad guys? Now you can, watch as they drive around doing bad guy stuff!
This completely open-source LTE shield for Arduino uses the latest and greatest CAT-M NB-IoT technology optimized for low-power IoT devices!
Use Hologram's cellular network to monitor a fleet of vehicles using OBDII, Raspberry Pi, GPS, and GSM.
This tutorial will take you step by step on how to use the Hologram GSM services with the RAK WisLTE module and Arduino IDE.
Remotely monitor soil moisture of your off-site garden plot. Data is plotted in a cloud service so you know when to go and water!
A device that prevents caretakers from leaving loved ones in unattended vehicles, which can possibly be unsafe due to the environment.
It's like NASA's Mars rover, except it's on Earth, communicates over cell towers and has way less latency.
Usually, you might use WiFi to control your IoT projects at home, but what do you do when your WiFi is down?
My car has been stolen! Turn it off with your smart phone wherever you are.
Effective and open data network that monitors real-time data from NOAA and users monitoring environmental information.
Out with the tilt indicator stickers, in with proactive notifications and tracking.
The Arduino Uno controls a 16 Neopixel unicorn horn. This includes a GPS module broadcasting through a cellular GSM shield.
Enable a Bluetooth LE IoT network with cloud control using Hologram Nova, Raspberry Pi Zero W and Droplit.io services and software.
Or connect with your social account:
New here? Create an account