Build a car hacking spy device to remotely read and send CAN commands and track GPS location. All based on open source software/hardware.
This is a project based on Arduino MKR GSM 1400 that will send a text notification when it senses rain drops.
Quick start with RAK8212 iTracker NB-IoT/Cat M/GPRS module which come from RAKWireless, and connect to Hologram online service.
Use the MKR NB 1500 and Hologram's cellular network to leverage new 5G bands to build IoT applications using the Chirpers flow designer.
Portable cell connected sensors for light and air transmits GPS location and readings to be stored and clickable maps created.
A guide for the Hologram.io Arduino MKR 1400 GSM workshop for IoTDevFest PHX 2019.
The WisLink development board is based on Quectel's next-generation BG96 IoT module.
Envirix is a monitoring system that is equipped with 10 different sensors. It is currently under develoment by me. Check it out!
48% percent of Detroit households are food insecure; OASIS autonomous food deliveries unite Detroit's urban farms with less-served families!
A prototype for Smart Cities to enhance Environment Monitoring using MKR GSM1400 and Hologram.
Keep unwanted visitors off your premises without relying on WiFi, and get a text message whenever a threat has presented itself!
Using the Nova Hologram, IoT Relay and a Raspberry Pi, easily make a remote smart switch so you can turn devices on/off remotely.
An industrial IoT prototype using Arduino, WIZ750SR, Raspberry Pi, and Hologram Nova to monitor environment.
Connect to the Losant IoT platform via MQTT on an Arduino connected over the Hologram cellular network!
Visually program IoT apps in the browser using an Arduino connected over cellular!
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
An opensource community driven sensor ecosystem for data collection and distribution.
Easily measure air quality, avoid polluted areas, and improve your health and that of your community.
This tutorial will take you step by step on how to use the Hologram GSM services with the RAK WisLTE module and Arduino IDE.
This tutorial will take you step by step on how to use the Hologram GSM services with the RAK WisLTE module.
This powerful cellular shield can easily turn your project into a full-fledged phone with voice, SMS, LTE data, GPS, and more!
Temperature & humidity monitoring is a very important factor in our daily life especially if we want to monitor remote places.
Cellular backdoor with Hologram Nova on Raspberry Pi flask-ask server-Amazon Alexa controlled.
This tutorial takes you step by step through the process of registering your Hologram sim and use it with the RAK iTracker module.