Learn how to make a powerful Arduino GPS tracker that posts data to the cloud via LTE CAT-M and view data graphically on IoT dashboards!
Connect your Raspberry Pi to the world through cellular with the Hologram Nova.
This completely open-source LTE shield for Arduino uses the latest and greatest CAT-M NB-IoT technology optimized for low-power IoT devices!
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
This powerful cellular shield can easily turn your project into a full-fledged phone with voice, SMS, LTE data, GPS, and more!
The Raspberry Pi is a great IoT platform and it's even better with a cellular internet connection.
This tutorial walks through sending a message with the Hologram Cloud via our Python SDK.
Use the MKR NB 1500 and Hologram's cellular network to leverage new 5G bands to build IoT applications using the Chirpers flow designer.
This project takes you through the easiest way to connect a device over cellular with the Hologram Dash hardware.
Pi Zero WAN provides low bandwidth communications in remote places.
Visually program IoT apps in the browser using an Arduino connected over cellular!
Sometimes your BeagleBone project needs to be mobile and connect to the cloud. This tutorial walks through setting up a USB modem.
Connect to the Losant IoT platform via MQTT on an Arduino connected over the Hologram cellular network!
The WisLink development board is based on Quectel's next-generation BG96 IoT module.
This quick start tutorial walks through sending a message from a Raspberry Pi to the Hologram Cloud via our Python SDK.
This tutorial walks through receiving a message from the Hologram Cloud via our Python SDK.
This example walks through connecting a Seeed Studio GPRS Shield to the Hologram cellular network using raw AT commands.
This tutorial will take you step by step on how to use the Hologram GSM services with the RAK WisLTE module.
Test your Hologram IoT SIM card using an iPhone.
This tutorial will take you step by step on how to use the Hologram GSM services with the RAK WisLTE module and Arduino IDE.
This tutorial takes you step by step through the process of registering your Hologram sim and use it with the RAK iTracker module.