Marcelo Sacchetin
Published © GPL3+

ChupaCarBrah - Car Hacking with BeagleBone and Python

Build a car hacking spy device to remotely read and send CAN commands and track GPS location. All based on open source software/hardware.

IntermediateFull instructions provided1 hour26,146
ChupaCarBrah - Car Hacking with BeagleBone and Python

Things used in this project

Hardware components

BeagleBone Blue
BeagleBoard.org BeagleBone Blue
×1
SparkFun GPS Receiver - EM-506 (48 Channel)
×1
Hologram Nova HOL-NOVA-R410
×1
OBD II OBD2 16 Pin Splitter Extension 1x Male and 2X Female Extension Cable Adapter
×1
Battery 1000mAh 2S 20C LiPoly
×1
JST Jumper Bundle for the BeagleBone Blue
Renaissance Robotics JST Jumper Bundle for the BeagleBone Blue
×1
Seeed Studio Grove Universal 4 Pin to BeagleBone® Blue 4 Pin Female JST/SH Conversion Cable (10 pcs pack)
×1
Wire, Hook Up
Wire, Hook Up
×1
SparkFun DC Barrel Jack Adapter - Male
×1

Story

Read more

Schematics

BeagleBone Blue CAN interface connect to OBDII port

How to use a JST/SH connector and hook-up wires to connect BeagleBone Blue to the OBDII CAN bus on vehicles.

Code

ChupaCarBrah

Credits

Marcelo Sacchetin

Marcelo Sacchetin

1 project • 21 followers

Comments